Adjustable heads

Adjustable heads can be used in projects where lateral or bending forces are not an issue. Their threaded rod makes the final level adjustment of the head on-site quick and easy. This makes them ideal for light structures and residential projects. Adjustable heads connect to the piles with adapters. If pullout forces are an issue, a wind lift adapter must be used. 

Adjustable heads

Adjustable heads can be used in projects where lateral or bending forces are not an issue. Their threaded rod makes the final level adjustment of the head on-site quick and easy. This makes them ideal for light structures and residential projects. Adjustable heads connect to the piles with adapters. If pullout forces are an issue, a wind lift adapter must be used. 

Flat Adjustable Head

Standard adjustables heads

Simple head with square plate in either 3.5”, 5”, or 8” sizes. Can connect to wood or steel structures with the 4 lag bolt screws or bolt holes located at their base.

Product Dimension Technical sheet Revit
TAS3C 3 1/2" x 3 1/2" Centered PDF icon Revit icon
TAS3O 3 1/2" x 3 1/2" Offset NA Revit icon
TAS5C 5 1/2" x 5 1/2" Centered PDF icon Revit icon
TAS5O 5 1/2" x 5 1/2" Offset NA Revit icon
Product Dimension Technical sheet
TAS3C 3 1/2" x 3 1/2" Centered PDF icon
TAS3O 3 1/2" x 3 1/2" Offset NA
TAS5C 5 1/2" x 5 1/2" Centered PDF icon
TAS5O 5 1/2" x 5 1/2" Offset NA
Adjustable Heads​

U-shaped adjustable heads

U-shaped opening of 3.5” to 8” to fit all common types of framing. Can be connected to frames with 1/2” lag screws or bolts. However, using edge-to-edge bolts is recommended.

Product Dimension Technical sheet Revit
TAU4 For 4" X 4" beam (Interior 3 1/2") icon pdf Revit icon
TAU5 For 4 1/2" X 3 1/2" beam (Interior 4 5/8") icon pdf Revit icon
TAU6 For 6" X 6" beam (Interior 5 1/2") icon pdf Revit icon
TAU6+ For 5 1/2" X 5" beam (Interior 6 1/8")  icon pdf Revit icon
TAU8 For 8" X 8" beam (Interior 7 1/2")  In construction Revit icon
TAU8+ For 8" X 8" beam (Interior 8 1/8") In construction Revit icon
Product Dimension Technical sheet
TAU4 For 4" X 4" beam (Interior 3 1/2") icon pdf
TAU5 For 4 1/2" X 3 1/2" beam (Interior 4 5/8") icon pdf
TAU6 For 6" X 6" beam (Interior 5 1/2") icon pdf
TAU6+ For 5 1/2" X 5" beam (Interior 6 1/8")  icon pdf
TAU8 For 8" X 8" beam (Interior 7 1/2")  In construction
TAU8+ For 8" X 8" beam (Interior 8 1/8") In construction
L Shaped Adjustable Heads​

L-shaped adjustable heads

Ideal when framing beams are not of standard dimensions. Head has a 6” base plate without an edge on one side so that it can easily slip under the structure being supported. Can be securely attached to frames using ½” lag screws. To best resist pullout forces, using four lag screws is recommended.

Product Dimension Technical sheet Revit
TAL6 Base: 6" x 5", Vertical : 6 1/4" x 5" In construction Revit icon
Product Dimension Technical sheet
TAL6 Base: 6" x 5", Vertical : 6 1/4" x 5" In construction

What types of structures can you connect Postech adjustable heads to?

Wood structures

You can connect Postech fixed heads directly to wood structures using bolts, lag screws, or any other appropriate structural fastener.

Steel structures

You can connect Postech fixed heads directly to steel structures with either bolts or welding, depending on the project.

Concrete structures

You can connect Postech fixed heads to concrete structures. Our standard concrete heads can anchor with sufficient concrete coverage; rebar rods can be welded to the head on-site to facilitate the connection with the concrete reinforcement. Our technical team can also build custom anchoring heads to accommodate specific loads.

You need more information?

Contact your local dealer

You need more information?

Contact your local dealer